Innofil PLA

£22.50 ex. VAT

The easiest material to print with. Derived from corn starches it is cheap and eco-friendly too. We always recommend starting with PLA and using it wherever possible. It is our most popular material but if you require more mechanical strength or thermal resistance you will need to extend your filament palette.

Clear
SKU: N/A Categories: ,

Additional information

Weight 0.75 kg
Filament Diameter

1.75mm [EinStart-C], 2.85mm [Ultimaker]

Description

Innofil PLA 0.75kg. Available in 2.85mm and 1.75mm diameters and approximately 90m long.

PLA is Poly-Lactic-Acid, a biodegradable polymer with a low melting point. It is an easy material to print with and Innofil3D PLA gives a smooth printing result. This most used 3D printing material is available in a wide range of RAL and Innofil3D colours and translucent variants. When properly cooled, PLA has a higher maximum printing speed, lower layer heights and sharper printed corners. Combining this with low warping of the print and it’s ease of use makes it our recommended filament for schools.

Reasons to choose Innofil PLA

  • Low processing temperature
  • Low warping
  • No heated bed required
  • No odour during processing

Technical Information

The easiest material to print with. Derived from corn starches it is cheap and eco-friendly too. We always recommend starting with PLA and using it wherever possible. It is our most popular material but if you require more mechanical strength or thermal resistance you will need to extend your filament palette.

Data Sheets

Download Technical Data Sheet

Download Safety Data Sheet